基于超声波干涉的峰谷法计算声速值及实验误差探讨

介绍了基于Cassy Lab软件下的超声波干涉实验,提出了利用超声波干涉现象测量声速的方法.根据干涉理论推导了峰谷法测量声速的计算公式.分析和探讨了峰谷法计算声速的误差来源和改进方法.     

关于超音速多普勒效应的思考

超音速多普勒效应由于其不便于测量,基本停留在纯理论分析阶段,导致人们产生了一些错误的观点.本文通过逻辑分析、计算机软件模拟等手段,对超音速多普勒效应的音频时序进行了分析研究,找出了错误观点产生的原因,作出了相应的解释,并对错误观点进行了修正,提供了解决方案.     

超声波多普勒实验仪

基于多普勒效应原理,分别测得波源的频率和发生相对运动时观测到的频率即可分析出物体相对运动的速度.实验仪以单片机为测控系统核心实现超声波多普勒效应演示实验及速度测量并提供了具体的设计方案与实验结果.同时单片机赋予了仪器以软件为核心的技术特点,具有重塑性与可扩展性.     

界面条件下线型超声相控阵声场特性研究

开展了界面条件下线型超声相控阵声场特性的研究.将带有楔块的超声相控阵问题合理简化为液固界面的情况进行讨论.根据射线声学理论,计算了单阵元在液固界面存在时的辐射声场,进而推导了聚焦法则,得到了超声线型阵在液固界面存在时的声场、位移场表达式.对安装在楔块上的相控阵换能器的辐射声场进行了仿真,并讨论了聚焦对换能器轴向和横向声场的影响,结果表明利用聚焦能提高分辨率和灵敏度,但聚焦区域之外声束性能更差,在实际检测中要合理利用聚焦. 关键词： 超声相控阵 界面 声场 聚焦     

Simultaneous determination of docosahexaenoic acid and eicosapentaenoic acid in common seafood using ultrasonic cell crusher extraction combined with gas chromatography

An effective method for the simultaneous determination of docosahexaenoic acid and eicosapentaenoic acid in common seafood by gas chromatography was developed and validated. Total docosahexaenoic acid and eicosapentaenoic acid were extracted from seafood by ultrasonic cell crusher assisted extraction and methyl esterified for gas chromatography analysis in the presence of the internal standard. The linearity was good (r > 0.999) in 9.59 ∼ 479.5 μg/mL for docosahexaenoic acid and 9.56 ∼ 477.8 μg/mL for eicosapentaenoic acid. The intrarun and interrun precisions were both within 4.8 and 6.1% for the two analytes, while the accuracy was less than 5.8%. The developed method was applied for determination of docosahexaenoic acid and eicosapentaenoic acid in six kinds of seafood. The result showed the content of docosahexaenoic acid and eicosapentaenoic acid was all higher than 1 mg/g in yellow croaker, hairtail, venerupis philippinarum, mussel, and oyster. Our work may be helpful for dietary optimization and production of docosahexaenoic acid and eicosapentaenoic acid.     

A Stokes model with cavitation for the numerical simulation of hydrodynamic lubrication

We present a cavitation model based on the Stokes equation and formulate adaptive finite element methods for its numerical solution. A posteriori error estimates and adaptive algorithms are derived, and numerical examples illustrating the theory are supplied, in particular with comparison to the simplified Reynolds model of lubrication. Copyright © 2010 John Wiley & Sons, Ltd.     

New hydrogels from interpenetrated physical gels of agarose and chemical gels of polyacrylamide: Effect of relative concentration and crosslinking degree on the viscoelastic and thermal properties

In this article, we report on the viscoelastic and thermal properties of agarose–polyacrylamide (PAAm) interpenetrating polymer hydrogels (IPHs) and semi‐IPHs as a function of agarose concentration and PAAm crosslinking degree. The results demonstrated that the agarose is able to gel in the presence of crosslinked and linear IPHs. In addition, the reticulation of PAAm in the presence of agarose is confirmed for the case of IPHs giving rise to systems with dimensional stability at high temperatures. The formation of a fully IPH was ascertained at low agarose concentrations. A study of the morphology and nanoscale elasticity of the different systems has been carried out with atomic force microscopy/ultrasonic force microscopy (UFM). UFM data provide further evidence of interpenetration, allowing us to visualize—if present—phase‐separated domains with nanoscale resolution for the various crosslinking degrees and PAAm and agarose concentrations used during the formation of the IPHs. © 2010 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2010     

Numerical simulation of the unsteady behaviour of cavitating flows

A 2D numerical model is proposed to simulate unsteady cavitating flows. The Reynolds‐averaged Navier–Stokes equations are solved for the mixture of liquid and vapour, which is considered as a single fluid with variable density. The vapourization and condensation processes are controlled by a barotropic state law that relates the fluid density to the pressure variations. The numerical resolution is a pressure‐correction method derived from the SIMPLE algorithm, with a finite volume discretization. The standard scheme is slightly modified to take into account the cavitation phenomenon. That numerical model is used to calculate unsteady cavitating flows in two Venturi type sections. The choice of the turbulence model is discussed, and the standard RNG k–εmodel is found to lead to non‐physical stable cavities. A modified k–εmodel is proposed to improve the simulation. The influence of numerical and physical parameters is presented, and the numerical results are compared to previous experimental observations and measurements. The proposed model seems to describe the unsteady cavitation behaviour in 2D geometries well. Copyright © 2003 John Wiley & Sons, Ltd.     

一类弱散射界面背向散射超声散斑一阶统计特性

对超声入射至分布有细小凹坑的界平面，这一类弱散射界面背向散射所形成的超声散斑的一阶统计特性进行了研究.在假设条件下，理论分析的结果表明，空间超声散斑的振幅服从Rice分布，而它们的相位概率密度函数是一个包含Gauss分布函数和Gauss概率积分函数的复合函数.当细孔密度非常大时，超声散斑的振幅就趋于Rayleigh分布.应用作者建立的由计算机控制扫描的实验系统，对这一类弱散射界面反射超声散斑的振幅分布进行了测量.实验结果表明，理论分析的结果是正确的，由此，所作的假设条件也是成立的. 关键词： 弱散射 超声散斑 统计特性     

平面应变条件下孔洞化不稳定性问题研究

考虑平面应变条件下，由一类推广的幂次neo—Hookean材料组成的内部分布温度场的圆柱体在轴向和径向载荷作用下的孔洞化不稳定性问题，研究中发现当材料参数满足一定的条件时，存在着一个载荷临界值，当外加载荷大于该临界值时，圆柱体中心将出现一个圆柱形的孔洞，即发生了孔洞化不稳定性现象并详细讨论了温度和材料参数对孔洞化极限载荷的影响。